murs140 - murs160 document number: ds30130 rev. 10 - 2 1 of 4 www.diodes.com september 2010 ? diodes incorporated murs140 - murs160 1.0a surface mount super-fast rectifier features ? glass passivated die construction ? super-fast recovery time for high efficiency ? surge overload rating to 35a peak ? ideally suited for automated assembly ? lead free finish/rohs compliant (note 1) ? green molding compound (no halogen and antimony) (note 2) mechanical data ? case: smb ? case material: molded plastic. ul flammability classification rating 94v-0 ? moisture sensitivity: level 1 per j-std-020 ? terminals: solder plated term inal - solderable per mil-std- 202, method 208 ? lead free plating (matte tin finish). ? polarity: cathode band or cathode notch ? marking information: see page 3 ? ordering information: see page 3 ? weight: 0.093 grams (approximate) maximum ratings @t a = 25c unless otherwise specified single phase, half wave, 60hz, re sistive or inductive load. for capacitance load, derate current by 20%. characteristic symbol murs140 murs160 unit peak repetitive reverse voltage working peak reverse voltage dc blocking voltage (note 7) v rrm v rwm v r 400 600 v rms reverse voltage v r ( rms ) 283 424 v average rectified output current @ t t = 135 ci o 1.0 a non-repetitive peak forward surge current 8.3ms single half sine-wave superimposed on rated load i fsm 35 a thermal characteristics characteristic symbol value unit typical thermal resistance, junction to terminal (note 3) r jt 15 c/w operating temperature range t j -55 to +150 c storage temperature range t stg -55 to +175 c electrical characteristics @t a = 25c unless otherwise specified characteristic symbol value unit forward voltage @ i f = 1.0a, t j = 25c @ i f = 1.0a, t j = 150c v fm 1.25 1.05 v peak reverse current @ t a = 25 c at rated dc blocking voltage (note 7) @ t a = 150 c i rm 5.0 150 a reverse recovery time (note 5) t r r 50 ns forward recovery time (note 6) t f r 50 ns typical total capacitance (note 4) c t 10 pf notes: 1. eu directive 2002/95/ec (rohs). all applicable rohs exemptions applied, see eu directive 2002/95/ec annex notes . 2. product manufactured with data code 0924 (week 24, 2009) and newer are built with green molding compound. 3. unit mounted on pc board with 5.0 mm 2 (0.013 mm thick) copper pads as heat sink. 4. measured at 1.0mhz and applied reverse vo ltage of 4v dc. 5. measured with i f = 0.5a, i r = 1.0a, i rr = 0.25a. see figure 5. 6. measured with i f = 1.0a, di/dt = 100a/ s, duty cycle 2.0%. 7. short duration pulse test used to minimize self-heating effect. top view bottom view ? green
murs140 - murs160 document number: ds30130 rev. 10 - 2 2 of 4 www.diodes.com september 2010 ? diodes incorporated murs140 - murs160 020406080100120 i, ave r a g e f o r wa r d c u r r e n t (a) o t , terminal temperature ( c) fig. 1 forward current derating curve t 0 140 160 single phase half wave 60hz resistive or inductive load fig. 2 typical forward characteristics 11 01 0 0 i, p eak f o r wa r d s u r g e c u r r en t (a) fsm number of cycles at 60hz fig. 3 surge current derating curve 0 10 20 30 pulse width 8.3ms single half-sine-wave 2 5 20 50 1.0 04 0 1 2 0 20 140 fig. 4 typical reverse characteristics v , reverse voltage (v) r i , reverse current ( r ma)
murs140 - murs160 document number: ds30130 rev. 10 - 2 3 of 4 www.diodes.com september 2010 ? diodes incorporated murs140 - murs160 ordering information (note 8) part number case packaging MURS140-13-F smb 3000/tape & reel murs160-13-f smb 3000/tape & reel notes: 8. for packaging details, go to our website at http://www.diodes.com. marking information package outline dimensions suggested pad layout smb dim min max a 3.30 3.94 b 4.06 4.57 c 1.96 2.21 d 0.15 0.31 e 5.00 5.59 g 0.05 0.20 h 0.76 1.52 j 2.00 2.50 all dimensions in mm smb dimensions value (in mm) z 6.7 g 1.8 x 2.3 y 2.5 c 4.3 u1xb = product type marking code u1gb = murs140 u1jb = murs160 = manufacturers? code marking yww = date code marking y = last digit of year (ex: 2 for 2002) ww = week code (01 to 53) a b c d g h e j yww u1xb
murs140 - murs160 document number: ds30130 rev. 10 - 2 4 of 4 www.diodes.com september 2010 ? diodes incorporated murs140 - murs160 important notice diodes incorporated makes no warranty of any kind, express or implied, with regards to this document, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose (and their equivalents under the laws of any jurisdiction). diodes incorporated and its subsidiaries rese rve the right to make modifications, enhanc ements, improvements, corrections or ot her changes without further notice to this document and any product descri bed herein. diodes incorporated does not assume any liability arising out of the application or use of this document or an y product described herein; neither does di odes incorporated convey any license under its patent or trademark rights, nor the rights of others. any customer or us er of this document or products described herein in such applica tions shall assume all risks of such use and will agree to hold diodes incorporated and all the companies whose products are represented on diodes incorporated website, harmless against all damages. diodes incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthoriz ed sales channel. should customers purchase or use diodes inco rporated products for any unintended or una uthorized application, customers shall i ndemnify and hold diodes incorporated and its representativ es harmless against all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim of personal injury or death a ssociated with such unintended or unauthorized application. products described herein may be covered by one or more united states, international or foreign patents pending. product names and markings noted herein may also be covered by one or more united states, international or foreign trademarks. life support diodes incorporated products are specifically not authorized for use as critical component s in life support devices or systems without the express written approval of the chief executive offi cer of diodes incorporated. as used herein: a. life support devices or syst ems are devices or systems which: 1. are intended to implant into the body, or 2. support or sustain life and whose failure to perform when proper ly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in significant injury to the user. b. a critical component is any component in a life support dev ice or system whose failure to perform can be reasonably expect ed to cause the failure of the life support device or to affect its safety or effectiveness. customers represent that they have all necessary expertise in the safety and regulatory ramifi cations of their life support dev ices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-rel ated requirements concerning the ir products and any use of diodes incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or s ystems-related information or support that may be provided by diodes incorporated. further, customers must fully indemnify diodes incorporate d and its representatives against any damages arisi ng out of the use of diodes incorporated pr oducts in such safety-critical, life suppor t devices or systems. copyright ? 2010, diodes incorporated www.diodes.com
|
